Skip to content
Your local roofer since 1982•46 Nahant St, Wakefield, MA Licensed, bonded & insured•Free, no-obligation estimates
White colonial home with a gutter and downspout along the roof edge, autumn trees behind
Gutters

How Much Do New Gutters Cost? A Guide for North Shore Homeowners

Updated July 21, 2025 9 min read Golini Roofing, Wakefield MA

How much do new gutters cost? National cost guides put a typical installed job at roughly $10 to $16 per linear foot in 2026, and This Old House's 2026 guide puts a 1,500 sq ft home near $2,400 and a 2,000 sq ft home near $3,200. Those are national figures, not a quote. On a Wakefield or North Shore house, the real number depends on how many feet of eave you have, how high the gutters hang, how many downspouts you need, and whether the boards behind the old gutters are still solid.

Below, we walk through the published national ranges (with sources and dates), then the things that actually move the price on a Massachusetts house, so you can read any gutter estimate with a clear eye. Golini Roofing has been in Wakefield since 1982. Our crew installs, replaces and repairs gutters, and we price every job after we have walked around the house.

What national cost guides say gutters cost in 2026

We do not publish a price list, because two houses with the same square footage can need very different gutter work. What we can do is point you to the national numbers that are public, so you know the ballpark.

Source (national figures)What it reportsDate
Homewyse, cost to install gutters$10.41 to $15.77 per linear foot, national average starting point, installedMay 2026
This Old House, gutter installation cost$3 to $29 per linear foot depending on material, average about $16; about $2,400 for a 1,500 sq ft home at that averageUpdated October 2026
This Old House (same guide)Copper runs up to about $29 per linear foot; vinyl sits at the low endUpdated October 2026
This Old House (same guide)Downspout parts about $4 to $21 per unit, before laborUpdated October 2026

A few things to know about these numbers. They are national averages, and local labor rates can differ from them. Homewyse states that its figure leaves out repairs to existing framing and trim (which is where fascia repair falls), permit fees and sales tax. And neither guide can see your house. Treat them as a sanity check, not a budget.

Every roof and gutter job we do is priced after we see it, in a free, written estimate.

Gutter cost for a 1,500 sq ft house: why square footage is only a rough guide

A common version of this question is "what do gutters cost for a 1,500 square foot house?" This Old House uses a quick rule: divide the home's square footage by 10 to estimate linear feet of gutter, so a 1,500 sq ft house would need about 150 feet. At the guide's national average of $16 a foot, that lands near $2,400.

That rule is a starting point, and on North Shore houses it can be off in either direction, because gutters follow the eaves, not the floor area:

  • A two-story colonial with 1,500 sq ft of living space has a footprint of roughly 750 sq ft. Its eaves are shorter than a ranch of the same size, so it may need fewer feet of gutter, but every foot is hung higher.
  • A cape often has long front and back eaves and gable ends with no gutter at all.
  • A hip roof sheds water on all four sides, so it usually needs gutter all the way around. Our post on gable vs hip roofs explains the difference.
  • Porches, sunrooms and additions add their own short runs, corners and downspouts, and each one adds labor.

The quickest way to get a real number for your house is to measure the eaves that actually drain to a gutter, or to have someone walk around and do it for you.

What drives the price of new gutters

These are the line items that change a gutter estimate the most. When two quotes look far apart, the difference is almost always in one of them.

Linear feet and corners

Length is the base of every gutter price. Corners, end caps and short runs over bump-outs take more time than a long straight eave, so a house with a lot of jogs costs more per foot than a simple rectangle.

Material and size

In This Old House's 2026 comparison for a 200 foot system, vinyl came in lowest, aluminum and steel in the middle, and copper highest by a wide margin. Size matters too: a 6 inch gutter uses more material than a 5 inch one, and some roofs need the bigger size to keep up with heavy rain. If you want to know which size your roof needs, read our guide to sizing gutters. The right size depends on the roof, so it is worth settling before comparing prices.

Seamless versus sectional

Seamless gutters are formed to length at the house, so a long run has no joints except at the corners. Sectional gutters come in pieces that are joined along the run. This Old House notes that seamless costs more up front and sectional is usually cheaper. Fewer joints means fewer places to leak later.

Height, stories and access

A first-floor porch run can be done from a short ladder. A third-floor eave on a Victorian, or a gutter above a steep bank or a glass sunroom, takes more setup and more careful work. This is one of the biggest reasons two houses with the same footage get different prices.

Downspouts and where the water goes

Each downspout adds material and labor, and so does carrying the water away from the house with extensions. Placement is worth thinking through before installation; our post on downspout placement questions covers what to ask.

Taking down the old gutters

Removing and hauling away the old system is labor, even if it is a short line on the estimate. Check that it is included. On our jobs, the old gutters, scraps and fasteners leave with us, and the yard gets a magnetic sweep for nails.

Fascia and trim repair

The fascia is the board along the roof edge that the gutters hang on. Years of overflow can rot it, and a new gutter screwed into soft wood will pull loose. We fix soft or rotted fascia before new gutters go up. Because the amount of rot is unknown until the old gutter comes off, ask how an estimate handles it: a set allowance, a per-foot price, or a call before any extra work.

Gutter guards

Guards add cost on top of the gutters themselves, and prices vary widely by type. In a town like Winchester, Lynnfield or Boxford with big trees over the house, they can cut down on fall cleanouts. They do not make a gutter maintenance-free, and they do not prevent ice dams.

Doing gutters with a new roof

If your roof is due in the next few years, it is worth pricing both together. One setup covers both jobs, and the gutter can be hung to match the new drip edge and roof edge. Our roof replacement page explains how we handle the edge.

How Massachusetts weather affects what you should buy

A gutter in Wakefield has a harder life than the same gutter in a mild climate. Three things are worth planning for.

Ice dams and snow load

An ice dam is a ridge of ice at the roof edge that stops melting snow from draining, so water backs up under the shingles. The University of Minnesota Extension explains that it forms when snow melts on the warmer part of the roof and refreezes at the colder edge. Gutters do not cause ice dams, but the US Department of Energy's Building America Solution Center notes that gutters can fill with snow that freezes and becomes part of a forming ice dam. That weight is why solid fascia and well-fastened hangers matter here. The real fix for ice dams is usually in the attic; see our skylights, flashing and venting page.

Heavy rain in short bursts

Summer thunderstorms and nor'easters dump a lot of water fast. A gutter that is too small, pitched flat, or short on downspouts overflows in exactly those storms, which is when water lands at the foundation.

Leaves

Oaks and maples fill gutters every fall. Clogged gutters overflow and hold water against the fascia. Plan on cleanouts, guards, or both.

Repair or replace: when new gutters are worth the money

Not every gutter problem needs a new system. A single loose hanger or one leaking corner can usually be fixed on its own. Once the problems show up all the way around the house, or the gutter is simply too small for the roof above it, new gutters tend to cost less over time than repeated repairs. Signs it is time to look closer:

  • Overflow in a downpour even right after a cleanout
  • Runs that dip or have started to lean off the fascia
  • Leaks that come back at the same joints after resealing
  • Stained, soft or flaking trim behind the gutter line
  • Rust spots or holes in older steel gutters

If the trouble is only at the bottom of a downspout, a crushed or clogged extension is often a simple fix rather than a reason for new gutters.

How to compare gutter estimates

Lay quotes side by side and check that they cover the same work. Questions worth asking each contractor:

  1. How many linear feet, what size and what material is the price based on?
  2. Seamless or sectional?
  3. How many downspouts, and where will each one empty?
  4. Is removal and disposal of the old gutters included?
  5. How is rotted fascia handled and priced if it turns up?
  6. Are guards included or a separate option?
  7. Who does the work: the contractor's own crew or a subcontractor?

At Golini Roofing, our own crew hangs the gutters with our own gutter equipment, and we are registered as a Massachusetts Home Improvement Contractor (#114691). Our free written estimate says whether a repair will do or the gutters should be replaced, and why. You can read more on our gutter installation and repair page.

Common questions about gutter costs

How much do new gutters cost for a 1,500 sq ft house?

Using This Old House's national rule of thumb (about 150 feet of gutter at an average of $16 a foot), roughly $2,400 in 2026. Your eave length, the number of stories and the downspouts you need can push the real figure up or down.

Is removing the old gutters included in the price?

It should be stated on the estimate. Removal and disposal take labor, so check that the line is there. On our jobs, the old gutters leave with us.

Do seamless gutters cost more?

Usually, yes. National guides say seamless costs more up front than sectional because it is formed to length at the house. You get fewer joints that can leak.

Why are two gutter quotes so far apart?

Most of the time the quotes cover different work: a different gutter size, fewer downspouts, no removal, or no plan for rotted fascia. Compare them line by line using the questions above.

Does Golini Roofing publish gutter prices?

No. We walk around the house first and then give you a free, written, no-obligation estimate for your specific gutters.

Want a real number for your house? Request a free estimate or call us at (781) 246-0141. We will walk around the house, look at the roof edge, the fascia and every downspout, and put a written price in your hands.

Golini Roofing trucks parked along a residential street
Free estimate

Questions about your roof?

Golini Roofing has worked on roofs across Wakefield and the North Shore since 1982. Every roof is priced after we see it, and the written estimate is free.

Talk to the people who do the work

Send a request from our contact page or call (781) 246-0141.

Request a free estimate Call (781) 246-0141